BLOG

Blog

High Temperature Industrial LED Lights Components Heat Dissipation & Reliability

High-Temperature Industrial LED Lights: Components, Heat Dissipation & Reliability

The energy efficiency, low maintenance, and long service life of LED lighting make it a popular choice for industrial applications. However, LED performance and reliability can suffer at high temperatures. In industries such as steel, cement, power, foundries, refineries and chemical plants, ambient temperatures are high, and this can affect lighting systems. The energy efficiency, low maintenance, and long service life of LED lighting make it a popular choice for industrial applications. But it can be a challenge for LED performance and reliability when operating in high temperatures. In some industries, e.g., steel, cement, power, foundries, refineries and chemical plants, ambient temperature levels are high, and this can impact the performance of the lighting systems.

One of the bigger causes of LED degradation and premature component failure is excessive heat. Raises the junction temperature of the LED, leads to lumen depreciation, impacts colour consistency and imposes extra thermal stress on components like LED drivers, capacitors, MOSFETs, and PCBs. Even the well-designed LED fixture can have shortened operating time and decreased performance without the proper heat management.

Effective thermal management, coupled with sound component selection and robust luminaire design, is needed to overcome the challenges. Pyrotech Technologies is dedicated to enhancing the thermal characteristics of industrial LEDs and is exploring the use of 2Tc MCPCB and Dow thermal paste. These materials can facilitate effective thermal dissipation from critical components, ensuring reliable lighting performance in harsh industrial environments.

Why don't high temperatures work well with LED lights?

LEDs transform electrical energy into light, but some of the energy is also wasted as heat. The heat has to be dissipated from the LED chip by an effective thermal management system.

If the heat is not dissipated properly, the junction temperature of the LED increases. The increased junction temperatures can accelerate the lumen depreciation, change the colour and shorten the life of the LED.

The issue isn't confined to the LED chip. The driver, PCB, capacitors, solder joints and protection components are also affected by excessive heat. Thus, the choice of appropriate components and the design of a proper thermal path will be key for industrial LED lighting.

Which LED Components Can Fail Due to High Temperature?

There are several parts of an LED luminaire that can be impacted by high temperatures. Knowing about these failure points enables manufacturers to build a more reliable lighting solution.

  • LED Junction and Phosphor: The place where light is produced is the LED junction. Too high junction temperatures can lead to lumen depreciation and colour variations. Optical materials (such as phosphor) can also deteriorate with age.
  • LED Package: Materials for generating light and for optical performance are included in the LED package. Exposure to high temperatures can cause degradation of materials, discolouration, and a decrease in light output if continuous.
  • Electrolytic Capacitors: Electrolytic capacitors are commonly used in LED drivers. Electrolyte ageing is accelerated by high temperatures and thus lowers the capacitor life. Capacitor failure can result in flickering, erratic output or driver failure.
  • Driver IC and MOSFET: The driver controls the electric power given to the LEDs. High temperatures can cause thermal stress on driver ICs and MOSFETs, which can impact their performance and reliability.
  • MCPCB and Solder Joints: The Metal Core Printed Circuit Board (MCPCB) is a circuit board designed to conduct heat from the LED components. Inadequate heat transfer and temperature fluctuations may lead to solder fatigue, delamination and connection failure.
  • Surge Protection Components: Reliable protection elements and Surge Protection Devices (SPDs) may be exposed to repeated electrical and thermal stress and accelerate their ageing process.
  • How Does Pyrotech Manage Heat in Industrial LED Lights?

    Thermal management is one of the key aspects in designing an industrial LED luminaire. Selected materials and construction techniques enhance heat transfer and component reliability for Pyrotech Technologies.

    Two important features used in this approach are:

  • 2Tc MCPCB for Better Heat Management: A metal-core printed circuit board is a type of metal-core board used to create a thermal path between the LED assembly and the heat-dissipation structure of the luminaire. Pyrotech's LED lighting design incorporates a 2Tc MCPCB for thermal management. The goal is to enhance thermal rejection from the LED assembly and to help maintain the operating temperature of critical components. Reduce the accumulation of heat around the LED package and ensure stable lighting operation by creating an effective MCPCB thermal path.
  • Dow Thermal Paste for Improved Heat Transfer:  Thermal paste is placed on appropriate surfaces that transfer heat from heat-generators to heat-dissipaters. Dow thermal paste is used by Pyrotech to overcome air gaps and enhance thermal contact between mating parts. This aids in directing heat effectively to the heat sink/housing. To ensure consistent thermal performance, correct application, surface contact and material selection are important.
  • Why is Thermal Management Important?

    A good thermal management system aids:

  • Minimising unwanted hot build-up.
  • Improved control of the temperature of LED junctions.
  • Safeguarding delicate electronic equipment.
  • Minimising the chances of premature component ageing.
  • Reducing variations in light output.
  • Improving durability of luminaires over time.
  • Main advantages of Pyrotech’s high-temperature LED lighting

  • Steady light output: Keeping the operating temperature under control reduces the lumen loss and colour shift that heat causes.
  • Better heat dissipation: The 2Tc MCPCB and Dow thermal paste move heat away from the key LED components efficiently.
  • More reliable components: Better thermal management puts less heat stress on the LEDs, drivers and other electronics.
  • Less maintenance: A well-planned thermal design can mean fewer component failures and fewer unplanned repairs.
  • Dependable installations over time: Choosing the right components and thermal design makes industrial lighting setups more reliable overall.
  • Suited to tough applications: When the luminaire is chosen correctly, it can handle demanding industrial conditions.
  • Technical details and design considerations

    These are the things to look at when designing LED lights for high-temperature areas:

  • PCB type: 2Tc Metal Core Printed Circuit Board (MCPCB)
  • Thermal interface material: Dow thermal paste
  • Heat dissipation: Heat travels through the MCPCB, the interface material and the luminaire housing
  • LED performance: Junction temperature, lumen maintenance and colour stability
  • Driver components: Capacitors, MOSFETs, driver ICs and protection devices
  • Environmental conditions: Ambient temperature, ventilation, dust and installation conditions
  • Thermal validation: Thermal endurance testing, temperature rise measurement and component temperature monitoring
  • Where high-temperature industrial LED lights are used

    Pyrotech’s industrial lights are suitable for harsh conditions such as:

  • Steel plants: Production areas, rolling mills and workshops
  • Cement plants: Areas around the kiln, production buildings and material handling areas
  • Power plants: Turbine halls, boiler areas and utility spaces
  • Electrical distribution and equipment: Electrical rooms and equipment areas that need properly certified luminaires
  • Chemical plants: Processing and manufacturing areas that involve chemicals
  • Heavy engineering: Workshops, production floors and high-ceiling installations
  • Products and certifications

    Pyrotech’s industrial lighting range includes:

  • LED High Bay Lights
  • LED Flood Lights
  • Electric Fuse Well Lights
  • LED Non-Flameproof Well Glass Lights
  • LED Lighting Fixtures
  • Industrial LED Drivers
  • For high-temperature installations, check the ambient temperature rating and the protection level before choosing a product.

    Testing and standards that may apply:

  • LM-79: Photometric and electrical testing of solid-state lighting products.
  • IEC 60598 / IS 10322: Safety requirements for luminaires.
  • IEC 61000: Electromagnetic compatibility requirements.
  • IEC 62384: Performance requirements for LED control gear.
  • IP66: Equivalent to protection against dust ingress and powerful water jets.
  • PESO / CIMFR / ex approvals: For certain approved lighting products for hazardous areas.
  • Certifications and approvals are based on a specific luminaire model and its approved configuration.

    Why Choose Pyrotech Technologies?

    Pyrotech Technologies Pvt. Ltd. has decades of experience in industrial LED lighting & electronic manufacturing. The company manufactures lighting products and LED drivers for industrial and infrastructure applications.

    Why is Pyrotech a good option for lighting industrial needs?

  • In-house LED Driver Development: More control over the driver design and product requirements.
  • Thermal Management Focus: Application of 2Tc MCPCB and Dow thermal paste in selected lighting designs.
  • Industrial Product Range: High Bay, Flood, Well Glass and Flameproof lighting solutions.
  • Customised Solutions: Application and project-specific lighting solutions.
  • Manufacturing Experience: Decades of experience in industrial lighting and electronics.
  • Testing & Quality Focus: Product testing to meet applicable performance, safety and electrical requirements.
  • Pyrotech's mission is to create industrial LED lighting solutions that solve the challenges that lighting systems face in the real world, such as heat management, electrical reliability and harsh environments.

    1. Why do LED lights fail at high temperatures?

    High temperatures lead to a rise in the LED junction temperature, which can shorten the life of electronic components, causing them to emit less light, flash or fail.

    All LED junctions, phosphor materials, electrolytic capacitors, driver ICs, MOSFETs, MCPCBs, solder joints, and surge protection components can be impacted.

    CPCB provides a thermal path that helps transfer heat away from the LED assembly towards the heat-dissipating structure.

    Dow thermal paste is used to provide better thermal contact between mating surfaces to promote better heat transfer.

    It is the required MCPCB construction for Pyrotech’s lighting design for thermal management. The actual construction and thermal efficiency must be verified by the product specification.

    CONTACT US

    TALK TO EXPERT

    Talk to our expert for industrial solutions, customised according to your specific requirements

    CATALOGUES DOWNLOAD

    PRODUCTS

    CORPORATE VIDEO

    SHARE THIS POST

    Share this post