BLOG

Blog

Industrial Colony Lighting – Dimming and LDR Control

Industrial Colony Lighting – Dimming and LDR Control

Lighting outdoors is essential for industrial colonies to ensure people's safety, visibility and security at night. But using all of the streetlights and the outdoor fixtures at their highest intensity all night long can cause unnecessary use of energy. The dimming and LDR control for industrial colony lights is a practical solution for controlling the light according to time or light conditions in the surroundings.

Programmable LED drivers, Light Dependent Resistors (LDRs), astronomical timers and centralised lighting controllers can help industries achieve energy efficiency without sacrificing the necessary illumination. These systems can be used in industrial townships, residential colonies, factory premises, internal roads and outdoor areas as well.

How does Industrial Colony Lighting Control work?

Industrial colony lighting control is the art of regulating the lighting function and intensity of outdoor LED lights by means of automatic equipment. The system is designed to automatically switch the lights on and off in accordance with the light levels in the room or a programmed schedule. There are two popular ways to do this: automatic dimming and lighting control using LDRs.

Automatic Dimming After Four Hours

Automatic dimming goes into effect during hours when the outside activity and traffic are reduced. This can be achieved using an astronomical timer, Real-time Clock (RTC) or a central controller and programmable LED drivers. The controller controls the brightness according to a preprogrammed schedule. 

For example:

  • Evening hours: Lights are at 100% to ensure proper visibility and safety.
  • After four hours: Brightness can be reduced to 70%.
  • Late evening hours: This brightness can be lowered to 50% during low-traffic times.
  • Mornings: Lights turn off automatically as per the time set or daylight.
  • These dimming levels are only suggested and should be adjusted based on the desired lux level, the road and safety conditions.

    Automatic Lighting Control by LDR (Light Dependent Resistor)

    The Light Dependent Resistor (LDR) is a device which varies its electrical resistance with the intensity of the light in the immediate vicinity. As the natural light fades in the evenings, the LDR senses the darkness and reports it to the controller, which then triggers the on command to the lights. When it's daylight, the sensor measures the light level and turns off the lights.

    Lighting Control Based on LDR can be very helpful in the automatic control of streetlights in industrial colonies, street road in factories, parking areas and outdoor premises. It is crucial to position the sensors correctly. Sensors can be influenced by artificial lighting, dust, moisture and varying weather conditions. Thus, proper installation and controller configuration are crucial for reliable operation.

    Technical Details of Industrial Colony Lighting Control

    The following technical parameters can be considered while designing an automatic lighting control system:

  • Control Devices: LDR sensors, astronomical timers, RTC and central controllers.
  • Dimming Methods: 1–10V analogue, PWM and programmable LED drivers.
  • Dimming Schedule: 100%, 70% and 50% brightness levels, subject to site requirements.
  • Automatic Switching: Daylight-based ON/OFF operation using LDR sensors.
  • Centralised Management: CCMS for monitoring and controlling multiple lighting points.
  • Driver Compatibility: LED drivers must support the selected dimming interface.
  • Installation Requirements: Proper sensor positioning, electrical protection and suitable outdoor enclosures.
  • Lighting Performance: Required lux levels and uniformity must be maintained during all dimming stages.
  • Industrial Colony Lighting Dimming and LDR Control offers advantages such as:

  • Reduced Energy Consumption: Automatic dimming means unnecessary use of full brightness at night when traffic is low, so as to save electricity.
  • Automatic Operation: LDR sensors and astronomical timers will help to reduce the need for manual switching of outdoor lights.
  • Improved Lighting Management: Different brightness levels can be maintained by different programmable drivers and central controllers, depending on operating schedules.
  • Lower Operating Costs: Lower electricity costs and better overall operating efficiency at industrial plants can be achieved by reducing energy usage.
  • Enhanced safety and visibility: Adaptive lighting supports appropriate levels of light on internal streets and walkways, parking facilities, and other significant sites.
  • Dimming control of Industrial Colony lighting system using LDR can be implemented in:

  • Industrial residential colonies and townships.
  • In-house roads and street lighting.
  • Factory premises and plant boundaries.
  • Outside public areas (parking areas).
  • Walkways and Pathways for pedestrians.
  • Industrial campuses/infrastructure facilities.
  • Security lighting around buildings or areas around the perimeter.
  • Certifications and Standards

    The lighting fixtures, LED drivers and control equipment should comply with the applicable Indian and international standards.

    Depending on the products chosen and the requirements for the project, this can be:

  • IS 10322 - Indian standard for Safety requirements for luminaires.
  • International standard on luminaire safety "IEC 60598".
  • IEC 61347 Safety requirements for lamp controlgear.
  • Electronic controlgear for LED modules – Performance requirements (IEC 62384).
  • IEC 61000: Requirements for EMC.
  • Any certification or approval statement shall be based on the actual product test report and valid certificates. Only in an installation environment where this is required, such as the hazardous area, does an approval like PESO apply.

    Why Choose Pyrotech Technologies?

    Pyrotech Technologies Pvt. Ltd. offers Industrial LED Lighting solutions for challenging industrial and infrastructure applications.

    Pyrotech has over 20 years of experience in the industrial lighting industry and has developed LED drivers in-house, expertly designing lighting products to meet project demands.

    Our capabilities include

  • LED lighting solutions for various applications in industry.
  • Designed and developed in-house LED drivers.
  • Optimised lighting solutions for the specific needs of the workplace.
  • Industrial LED lighting, roads and outdoor lighting.
  • Solutions developed for the electrical and operating conditions in India.
  • Technical assistance for industrial lighting.
  • Pyrotech is dedicated to providing solutions to deliver practical and energy-efficient lighting that enhances operational reliability and long-term performance while promoting improved visibility.

    1. An LDR sensor is used to control streetlights in what way?

    The LDR is used to detect the change in ambient light and to give instructions to the controller to turn the lights on when there is a low level of light available and off when there is a high level of light.

    Yes. Programmable LED drivers and astronomical timers can dim the lights to a desired level following a pre-programmed schedule, such as 100%, 70% and 50%.

    There are many ways this is accomplished, such as 1–10V analogue dimming, PWM, and programmable LED drivers

    A Central Control and Monitoring System can be used to monitor and control multiple lighting points from the central control point.

    Yes, it can help to save energy by modulating light levels during low activity times to meet the light requirements.

    CONTACT US

    TALK TO EXPERT

    Talk to our expert for industrial solutions, customised according to your specific requirements

    CATALOGUES DOWNLOAD

    PRODUCTS

    CORPORATE VIDEO

    SHARE THIS POST

    Share this post